M. Sepahi, H, Abusalma, H. Eisazadeh, Mechanical Properties of 3D-Printed Parts Made of Polyethylene Terephthalate Glycol, Journal of Materials Engineering and Performance, 2021, September

H. Eisazadeh, and D. K. Aidun, Residual stress reduction in dissimilar metals weld, Journal of Manufacturing Processes, 2021, April

H. Eisazadeh, M Torabizadeh, “Expanding a Mechanical Engineering Technology Curriculum to Include Additive Manufacturing,” ASEE, July, 2021.

C. Lin, H. Eisazadeh, “Design a Class Infusion Project of ASME Geometric Dimensioning and Tolerancing Standard”, American Society for Engineering Education, 126th Annual Conference & Exposition, American Society for Engineering Education, Montreal, CA, June, 2020

H. Eisazadeh, M. Rakita, V. Jovanovic, M. Torabizadeh, “Teaching Introduction to Welding in Undergraduate and Graduate Engineering Technology Programs”, American Society for Engineering Education, 126th Annual Conference & Exposition, Tampa, Florida, June, 2019

H. Eisazadeh, J. Bunn, and D.K. Aidun, “Stress and distortion mitigation technique for dissimilar welding”, Welding Journal/Research Supplement, (2018) November.

J. Goldak, M. Martinez, S. Tchernov, H. Nimrouzi, J. Zhou, D.K. Aidun, H. Eisazadeh, “Correlating Large Sets of Experimental Data with High Resolution Computational Weld Mechanics Models” The 12th International Seminar “Numerical Analysis of Weldability”, 2018, At Graz – Castle Seggau – Austria

H. Eisazadeh, and D.K. Aidun, “Investigation of Transient/residual Strain and Stress in Dissimilar Weld” Journal of Manufacturing Processes 26 (2017): 372–381.

H. Eisazadeh, J. Bunn, and D. K. Aidun, “Numerical and Experimental Investigation of Residual Stress Distribution in a Dissimilar Ferritic-Austenitic Weld” Welding Journal/Research Supplement, 96.1 (2017): 21S-30S.

H. Eisazadeh, J. Bunn, H.E. Coules, A. Achuthan, J.Goldak, and D.K.Aidun, “A Residual Stress Study in Similar and Dissimilar Welds” Welding Journal/Research Supplement, 2016, April, 111-1119.

H. Eisazadeh, A. Achuthan, J. A. Goldak, and D. K. Aidun, “Effect of material properties and mechanical tensioning load on residual stress formation in GTA 304-A36 dissimilar weld” Journal of Materials Processing Technology 222 (2015): 344-355.

H. Eisazadeh, D. Jason Haines, “Effects of gravity on mechanical properties of GTA welded joints” Journal of Materials Processing Technology 214, no. 5 (2014): 1136-1142.

M.Hamedi, H. Eisazadeh, M.Esmaelzadeh, “Numerical Simulation of Tensile Strength of Upset Welded Joints with Experimental Verification“, Materials & Design 31, no. 5 (2010): 2296-2304.

H. Eisazadeh, M.Hamedi, A.Halvaee, “New parametric study of nugget size in resistance spot welding process using finite element method” Materials and Design 31 (2010) 149–157.

H. Eisazadeh, M. Hamedi, K. Rashad-S, “Study of Temperature Distribution in Friction Stir Welding Through Finite Element Analysis” the 62nd Annual Assembly of International Institute of Welding (IIW), 12-17 July 2009 Singapore.

H. Eisazadeh, M. Hamedi, A. Halvaee, “Study of Nugget Formation in Resistance Spot Welding Process Through Finite Element Analysis” the 62nd Annual Assembly of International Institute of Welding (IIW), 12-17 July 2009 Singapore.

M. K. Besharati Geivi, K. Reshad, Seighalani, H. Eisazadeh, P. Bahemmat, “The influences of tool pin profile and tool shoulder diameter on friction stir welding pure titanium” International Conference on Welding Technologies, 11-13 June 2009 Ankara, Turkey.

H. Eisazadeh, M. Hamedi, “Prediction of Nugget Growth in Resistance Spot Welding Process using Finite Element Analysis” 8th Iranian National Conference on Welding and Inspection, Tehran, Iran, May 2007.

AR. Jahandideh, M. Hamedi, SA. Mansourzadeh, H. Eisazadeh, A. Rahi, “Investigating the Effects of Post Heating Parameter on the Quality of Automotive Body Joints in Resistance Spot Welding”, 2006.